The BMW iX2 has a reported range of up to 245 miles dependent upon the model. The vehicle has a Type 2 socket. All of the Type 2 charging cables up to 22kW listed below are compatible for charging all models of the iX2 including the xDrive30 models. The maximum charging speed when connected to an AC charging point is 11kW, but there is also an optional upgrade to a 22kW onboard charger. It is fine to use a 7KW, 11kW or 22kW charging cable or charger because an EV will not accept more than its battery capacity or draw more current than is available from the power supply.
Which is the best Mode 3 Type 2 to Type 2 32A charging cable for the BMW iX2?
We recommend the 3 Phase 32A charging cable for charging all models of the BMW iX2 at a public charging point or home wall box. However, you can also use the 1 Phase 32A charging cable, but it will charge at a lower rate when connected to 3 Phase charging points.
Which 3 pin charger is recommended for charging the BMW iX2 with a 13A UK plug?
If you require a 3 pin charger (also known as Mode 2, home charger and granny charger) for charging the BMW iX2 with a 13A 230V home / mains socket, we recommend our adjustable 6A 8A 10A 3 pin charger for regular charging. The fixed 10A 3 pin charger is not recommended to use for more than a few hours with an outlet that has not been certified as suitable for regular EV charging. The fixed 10A charger might also require a Type B RCD to be fitted in your consumer unit / fuse board. The adjustable 6A 8A 10A 3 pin charger has Type B protection built in.
Can I charge a BMW iX2 with a Commando socket?
If your premises has a Commando socket, or you want to charge your vehicle at a location that has one, such as a campsite or marina, then we have a selection of 1 Phase and 3 Phase CEE chargers to fit all 3 pin and 5 pin CEE sockets. The CEE socket may be 1 Phase 16A or 32A or 3 phase 16A or 32A. So please check before you buy. We also sell a multi adapter charger that can be used to charge the BMW iX2 with both 3 Phase (red) 16A (11kW) and 32A (22kW) CEE sockets and both 1 Phase (blue) 16A (3.7kW) and 32A (7.4kW) CEE sockets.
Which charging cables are included with the BMW iX2?
The information we have states that there is a Type 2 to 3 pin charger supplied with the iX2. From experience, we know that this information can change. Even when a cable does not come factory supplied with the EV, the dealer / seller still might provide one anyway or the manufacturer may stop including a cable as standard. The best way to be certain is to contact your dealer / seller to confirm which charging cable(s) are supplied with the vehicle.
BMW iX Charging Specifications based on charging 245 miles
Max Charging Capacity AC
11kW or 22kW
Vehicle Socket Type
Type 2
EV Charging Cable
Charging Time
Type 2 16A 1 Phase 3kW
20 hrs
Type 2 32A 1 Phase 7kW
10 hrs
Type 2 16A 3 Phase 11kW
7 hrs
Type 2 32A 3 Phase 22kW
3.5 hrs
Type 2 to 3 Pin charger 10A
35 hrs
Recommended T2 to T2 cable
Type 2 32A 3 Phase (22kW)
Charging times are approximate due to the variables that can influence the charging times. To date, all BMW models manufactured in Europe have an AC Type 2 socket.
This is a guide only and the charging times and charging capacity depend upon the model and battery capacity of your electric vehicle as well as the charging capacity of the charging point. A charging cable described as 3kW has a maximum charge of 3.7kW. A charging cable described as 7kW has a maximum charge of 7.4kW. The EV cables below are not manufactured by BMW. However, all the cables below are compatible with your EV. Please read your vehicle handbook. The recommended Type 2 to Type 2 Mode 3 charging cable is based on the EV cable that provides the fastest possible charge when using both a 1 Phase 32A and 3 Phase 32A charging station. This information is subject to change. If the AC onboard charger (OBC) of your vehicle is above 7.4kW then the 3 Phase 32A cable is always recommended.