Leapmotor C10 – Spiral Charging Cable 3 Phase 32A 22kW. Type 2 to Type 2

Use A Leapmotor C10 Compatible 22kW Spiral Cable For Connecting All Models Of The Leapmotor C10 To A Type 2 Socket Charging Point

Our 22kW Type 2 to Type 2 spiral charging cable will provide up to 22kW and can be plugged into the Type 2 socket of the Leapmotor C10 and any Type 2 charging point that does not have a cable already attached to it. It does not matter if the charging point is 3 Phase or 1 Phase because the charging point will work out how much current your Leapmotor C10 will accept and how much current the cable can handle. The cable can therefore be used with ALL Type 2 charging points with an open socket and the Type 2 socket of the Leapmotor C10. This cable is not an extension cable and it will not work if it is connected to another Type 2 plug. It is therefore not suitable for charging points with a cable already attached to it (a tethered cable) or as an extension for any other charging cable The working length of a spiral cable is about 2 metres below their stated length.

Is This 22kW Spiral Cable Compatible With The Leapmotor C10?

Choosing The Correct Charging Cable

Our Type 2 coiled cables adhere to the IEC 62196-2 standard. This ensures compatibility with Type 2 socket charging points and any Type 2 socket-equipped vehicle, such as the Leapmotor C10.

The vehicle and charging point will communicate with each other to ensure they deliver the precise amount of current to the vehicle. Therefore, it does not matter if a charging cable can supply more power than the vehicle can accept.

This cable is therefore suitable for charging the Type 2 socket of the Leapmotor C10. Please note that the manufacturer of this vehicle did not manufacture this charging cable.

Most electric vehicles sold in Europe come with a Type 2 socket, which may have either a 7 hole charging socket or a 9 hole CCS socket. CCS (Combined Charging Socket), accommodates the Type 2 cable in its 7 hole upper chamber.